Trusted In The Field
Our fasteners run in the supply chains of India's biggest names.
High-tensile bolts in grades 8.8, 10.9 and 12.9, long bolts up to 330 mm, and special fasteners in alloy and stainless steel, built precisely to your drawing — metric and imperial under one roof. Sold across South Asia under the trusted KFP® brand.
Few plants in India run both systems under one roof. Whether your drawing reads in millimetres or inches, it's manufactured here — cold forged, in-house, end to end.
The profiles your assembly line actually sees. Also tooled: Bristol, torq-set, polydrive — and any special head your drawing calls for.
From plain phosphate to Geomet and hot dip galvanizing — finished through proven, audited process partners and cleared by our in-house quality lab before despatch.
A full catalogue of bolts, screws, studs, nuts and washers — plus the non-standard parts most suppliers turn away. Made in property classes 8.8, 10.9 and 12.9 to whatever standard governs your order — DIN, IS, JIS, BS or ASME — or purely to your drawing. We cross-map the standard so the part drops straight into your assembly.
The workhorse of every assembly. Partially threaded DIN 931 and special-form DIN 962 hex bolts in M5–M24, lengths to 330mm. Applications: machinery, chassis, structural joints across automotive and general engineering.
Fully threaded hexagon screws (DIN 933) in standard and fine pitch (DIN 961) — maximum grip length for tapped holes and through-bolted joints.
Hexagon bolts with integrated flange that spreads clamping load — eliminating separate washers and speeding assembly. Widely specified in automotive engine, chassis and body-in-white applications.
Mushroom (cup) head with square neck that locks against rotation — the standard for timber structures, guard rails, trailers and sheet-metal assemblies.
Ground precision shoulders act as shafts for pivots, rollers, bearings and linkages. Custom shoulder diameters and lengths forged to drawing.
Cold forged wheel and hub bolts for passenger, commercial and agricultural vehicles — high-fatigue applications where forged grain flow matters most.
Flat countersunk head with a square neck that locks against rotation and sits perfectly flush — built for the cutting edges, scraper blades and ground-engaging tools of ploughs, graders, dozers and earthmoving equipment. Grades 5 and 8.
Flat countersunk head with a locating nib that seats into a slotted hole, holding the bolt against rotation as the nut is run up. Specified for road crash barriers, highway guardrails and flush structural joints. Custom nib geometry to drawing.
Square-head clamping bolts for lathe and machine-tool tool posts — high-torque tightening with cup, flat or dog points to your spec. Forged from heat-treatable alloy steel to take repeated clamping under load.
Low-head socket cap screws for space-restricted, high-torque fastening in tooling, dies, hydraulics and machine building.
Hammer-head and T-head bolts that lock into channels and slots — used in rail fastening systems, formwork, elevators and machine beds.
Large-series heavy hex head bolts for high-strength friction-grip (HSFG) structural steel connections in buildings, bridges and infrastructure.
Hexagon socket countersunk screws sit perfectly flush — specified where moving parts, airflow or aesthetics demand a flat surface.
Low-profile dome heads with hex socket drive — a clean, snag-free finish for panels, guards and visible assemblies.
T-slot bolts for machine-tool tables, jigs and fixtures — precision-forged necks for repeatable clamping under vibration.
Fit bolts with precision-ground shanks and threaded dog point for close-tolerance, shear-loaded locating joints in gearboxes and couplings.
Complete stud programme: metal-end interference classes 1d (DIN 938), 1.25d (DIN 939), 2d (DIN 835), 2.5d (DIN 940), plus DIN 949 and DIN 6379 for machine tools. Oversize and combination studs available.
Square head set screws in flanged (DIN 478), plain (DIN 479) and dog point (DIN 480) variants for tooling and heavy machinery adjustment.
Hexagon head screw plugs with sealing shoulder for hydraulic blocks, gearboxes, compressors and fluid systems.
Double-end studs with grind finish for flanged pipework, pressure vessels and engine applications demanding precise thread engagement.
Headed clevis pins for hydraulic cylinders, linkages and articulating joints — with or without split-pin holes.
Precision turned components and secondary operations on CNC and TRAUB turning centres — machining custom features standard forging cannot.
Hex, flange and special nuts in MS, Grade 8 and Grade 10 — formed in-house up to A/F M50×4 so the complete joint ships from one source.
Plain, spring and special washers matched to every bolt and nut we supply — one accountable source for the whole joint.
DIN references shown with their nearest ISO, IS (Indian), JIS (Japanese) and ASME/ASTM (imperial) equivalents. Cross-standards match in form and function but differ in fine detail — every KFP order is manufactured and inspected to the single standard or drawing that governs your purchase order.
We make the fasteners catalogue suppliers can't — non-standard heads, extra lengths, special shanks, custom grades in alloy or stainless, cold or hot forged to your drawing. Send the drawing and we'll confirm feasibility.
Our 50,000 sqft facility houses forging, die shop, machining and a full-scope fastener testing laboratory under one roof — so every high tensile bolt, screw and stud is inspected stage-wise from raw wire rod to final dispatch.
Tensile, proof load and yield verification — every grade claim is pulled to destruction and proven, not assumed.
Spectrometric chemical composition testing of incoming raw material — the right steel enters the plant or it doesn't enter at all.
Core and surface hardness verification after heat treatment, ensuring consistent mechanical properties batch after batch.
Grain flow, decarburization and case-depth examination — the internal evidence of a properly forged and treated fastener.
Non-contact VMM dimensional inspection of head geometry, thread profile and critical features to drawing tolerances.
Documented checks at forging, trimming, threading, heat treatment and packing — traceable from coil to carton.
KFP® is not just a manufacturer's stamp — it's a brand that wholesellers, dealers and retailers have stocked and stood behind for two decades. When the carton carries the KFP mark, the trade knows exactly what's inside: consistent grade, consistent finish, consistent dimensions.
The Kapur family's journey in fasteners began in 1983 — more than four decades of forging, learning and earning trust under an earlier banner. In 2005, Mr. Rajesh Kapur channelled that legacy into Kapur Fasteners Private Limited: a new name carrying twenty-two years of accumulated craft, and an outsized commitment to customer satisfaction.
Today, under second-generation leadership, KFP operates two manufacturing units in Ballabgarh, Faridabad — the fastener heartland of North India — serving automotive, OEM and industrial supply chains with both standard hardware and the non-standard, made-to-drawing parts that built our reputation.
Our promise has never changed: timely delivery of products whose performance and appearance honour a tradition of high manufacturing standards.
In the fastener trade since 1983. Built KFP on four decades of hands-on craft and honest commitment to every customer.
Second-generation leadership driving operations, quality systems and KFP's growth into new markets.
Yes — custom and non-standard fasteners are our specialty. Non-standard heads, extra lengths, special shanks and custom grades, cold or hot forged to your drawing. Send us a drawing and we confirm feasibility within one working day.
Metric from M5 to M50 with lengths up to 330 mm, and Imperial from ¼″ to 2″ with lengths up to 12.5″ — in standard and fine pitch, half or full thread.
High-tensile property classes 8.8, 10.9 and 12.9 as standard, with the full range from grade 4.6 to 14.9. Imperial grades 5, 8, T, V and R — plus stainless steel as custom specials.
Yes. We manufacture to DIN dimensional standards and cross-map to the nearest IS (Indian), JIS (Japanese), BS and ASME/ASTM (imperial) equivalents — or purely to your drawing, whichever standard governs your order.
In Ballabgarh, Faridabad, Haryana — within Delhi NCR. Two manufacturing units across 50,000 sq ft, supplying across North India and South Asia through a 250+ partner network.
Yes — an ISO 9001:2015 certified manufacturer, with forging, machining and a full fastener testing laboratory in-house.
Share your requirement and attach a drawing — or send it on WhatsApp. We respond within one working day.